5000 Series Aluminum Alloy
5000 series aluminum alloy is an aluminum alloy with Mg as the main alloying element, and a small amount of Mn, Cr, Ti and other elements are added. It is a non-heat treatable strengthened aluminum alloy. This series of alloys has low density and higher strength than 1000 series and 3000 series aluminum alloys. It is a medium-to-high-strength aluminum alloy with good fatigue and welding properties and good resistance to marine atmospheric corrosion.
GET A QUICK QUOTE
Product Types
5000 Series Aluminum can be rolled into aluminum sheet, coil and strip. It has strong processing performance and can meet the requirements of various industries for different types of products with different properties of 5000 series alloys.
5000 series aluminum mainly consists of 5005, 5052, 5083, 5754 and other alloys. It is widely used in shipbuilding and industrial fields and is one of the mature aluminum plate series.
5000 series aluminum composition
5005
5005 aluminum has high tensile strength, good elongation and good welding performance. It has good formability, corrosion resistance and oxidation deep processing performance. Its main uses are: automobile inspection fixtures, automobile fenders, automobile parts, automobile interior materials, conductors, cooking utensils, instrument panels, building decoration parts, building materials and interior and exterior decoration materials, etc.
Chemical compositions
Element | Percentage (%) |
Mn | 0-0.2 |
Fe | 0-0.7 |
Cu | 0-0.2 |
Mg | 0.5-1.1 |
Si | 0-0.3 |
Zn | 0-0.25 |
Ti | 0 |
Cr | 0-0.1 |
Al | 97-99.5 |
Others | 0-0.15 |
Mechanical properties
Property | Value |
Fatigue Strength | 38-86 MPa |
Yield strength | 40-210MPa |
Elongation | 1.1-23% |
5052
5052 aluminum sheet is the main component of the 5xxx series aluminum alloy and is also the most widely used anti-rust aluminum. 5052 aluminum has high fatigue strength, good plasticity, cannot be strengthened by heat treatment, and has excellent corrosion resistance and weldability. It can be used in its automobiles, construction, aircraft, hardware, etc.
Chemical compositions
Element | Percentage (%) |
Mn | 0-0.1 |
Fe | 0-0.4 |
Cu | 0-0.1 |
Mg | 2.2-2.8 |
Si | 0-0.25 |
Zn | 0-0.1 |
Ti | 0 |
Cr | 0.15-0.35 |
Al | 95.7-97.7 |
Others | 0-0.15 |
Mechanical properties
Property | Value |
Fatigue Strength | 66-140 MPa |
Yield strength | 75-280MPa |
Elongation | 1.1-22% |
5083
A trace amount of Be element is added to the 5083 aluminum alloy during production to improve the surface quality of the rolled plate and make it less likely to produce cracks. 5083 has medium strength, excellent weldability and formability, and is a representative of marine grade special aluminum plates. In addition, 5083 aluminum can also be used to manufacture tank car bodies, automobile fuel tanks, storage tanks, bus skins, etc.
Chemical compositions
Element | Percentage (%) |
Mn | 0.4-1.0 |
Fe | 0-0.4 |
Cu | 0-0.1 |
Mg | 4.0-4.9 |
Si | 0-0.4 |
Zn | 0-0.25 |
Ti | 0 |
Cr | 0.05-0.25 |
Al | 92.4-95.6 |
Others | 0-0.15 |
Mechanical properties
Property | Value |
Fatigue Strength | 93-190 MPa |
Yield strength | 110-340MPa |
Elongation | 1.1-17% |
5754
5754 aluminum alloy uses magnesium as the main alloy element and is a medium-high strength alloy. It has good fatigue resistance, welding performance and corrosion resistance, and is the main raw material for the automobile manufacturing and can making industries. We can customize 5754 products of different thicknesses and sizes according to customer needs.
Chemical compositions
Element | Percentage (%) |
Mn | 0-0.50 |
Fe | 0-0.40 |
Cu | 0-0.10 |
Mg | 2.6-3.6 |
Si | 0-0.4 |
Zn | 0-0.2 |
Ti | 0-0.15 |
Cr | 0-0.3 |
Al | 94.2-97.4 |
Others | 0-0.15 |
Mechanical properties
Property | Value |
Fatigue Strength | 66-140MPa |
Yield strength | 80-280MPa |
Elongation | 2.0-22% |
5000 series aluminum properties
- Alloy: 5005/5052/5083/5754/5086/5454
- Temper: O, H12, H16, H14, H24, H32, H36, etc
- Technology: DC/CC
- Main Alloy: Magnesium (Mg)
- Properties: It has strong corrosion resistance and pressure resistance, good heat transfer performance, and can be bent, stamped, stretched, etc.
5xxx aluminum series specifications
Series | 5000 series |
Typical Alloy | 5005, 5052, 5083, 5454, 5754 aluminum |
Temper | O, H14, H16, H22, H24, H26, H111, H112, etc |
Thickness | 0.10-350mm |
Width | 100-2600mm |
Length | Any |
MOQ | 1 Ton |
Sample | Free |
Delivery Time | 7-25 days after order confirmation |
Standards | GB/T 33227-2016、JIS H4000、ASTM B209、EN 485 |
Price Terms | FOB, CIF, CFR, CNF, etc. |
Payment Terms | L/C,D/A,D/P,T/T , West Union, Money Gram, etc. |
Common Size
- 3mm aluminum sheet
- 5mm aluminum sheet
- 1 inch aluminum sheet
- 16 gauge aluminum sheet
- 1/8 aluminum sheet
- 1/16 aluminum sheet
- 12mm aluminum sheet
What is 5000 series aluminum used for
Alloy | Applications Description | Details |
5005 | Conductors, cookware, instrument panels, instrument cases, architectural decoration, anodizing. | |
5052 | Aircraft fuel tanks, transportation vehicles, ship sheet metal parts, instruments, street lamp brackets, and building materials. | |
5083 | Ship, automobile and aircraft plate welding parts, fireproof pressure vessels, refrigeration units, television towers, drilling equipment, transportation equipment, missile parts, armor equipment. | |
5454/5154 | Welded structures, storage tanks, pressure vessels, ship structures, offshore facilities, transportation tanks. | |
5754 | Automobile manufacturing (car doors, molds, seals), main materials for can making, welded structures, storage tanks, pressure vessels, ship structures, transportation tanks. | |
5086 | Highly corrosion-resistant and weldable components, ships, automobiles, aircraft, cryogenic equipment, television towers, drilling equipment, transportation equipment, missile parts, armored equipment. | |
5182 | Can lids, automobile body panels, control panels, reinforcements, brackets and other parts. | |
5049 | Anodizing, electronic 3c aluminum alloy, instrument panel, instrument case, architectural decoration. |
5000 series aluminum plate summary
5005
The strength is the same as 3003, with good processability, weldability and corrosion resistance. It has good decorative properties after anodizing and is similar in color to 6063.
5052
Medium strength, good corrosion resistance, weldability and formability. High fatigue strength and seawater corrosion resistance.
5652
Limits the impurity elements of 5052 alloy and inhibits the separation of hydrogen peroxide. Other characteristics are the same as 5052.
5154
The strength is about 20% higher than that of 5052, and other properties are the same as 5052.
5254
Limits the impurity elements of 5154 alloy and inhibits the separation of hydrogen peroxide. Other characteristics are the same as 5154.
5454
The strength is about 20% higher than 5052, the characteristics are roughly the same as 5154, and the corrosion resistance in harsh environments is better than 5154.
5056
It has excellent corrosion resistance and machinability, and has good anodizing and dyeing properties.
5082
The strength is similar to 5083, and the formability and corrosion resistance are good.
5182
The strength is 5% higher than 5082, and other properties are the same as 5082.
5083
Alloys for welding structures. It is the corrosion-resistant alloy with the highest strength among practical non-heat-treatable alloys. It is suitable for welding structures and has good seawater resistance and low temperature resistance.
5086
It is a non-heat treatment alloy for welding structures with higher strength than 5154 and good seawater resistance.
5N01
The strength is the same as 3003, and the surface finish after anodization is high. Good formability and corrosion resistance.
5N02
The alloy used for reaming nails has good resistance to sea water.
5 major differences: 5xxx series vs 6xxx series aluminum
Different alloy compositions
The main alloying element of 5000 series aluminum alloy is magnesium, with a magnesium content of 3-5%; the alloying elements of 6xxx series aluminum alloy are magnesium and silicon, which enhance corrosion resistance and mechanical properties.
Different application fields
5000 series aluminum alloy is lighter than 6000 series aluminum alloy and can be used in aircraft, ships and other fields. Such as aircraft skins, fuel tank parts, bulletproof decks, etc. 6xxx series aluminum has good mechanical properties and is mainly used for support in the industrial and construction fields.
Different uses
5000 series aluminum alloy is mainly used as rolled products, aluminum plates, etc. Due to its good weldability, it is also used for welding structural parts; 6 series aluminum alloy is mainly used as aluminum profiles because of its good deformability, mainly hot extrusion profiles and die casting. Of course, 6xxx series aluminum alloy can also be used to make plates. For example, 6009 and 6010 can be used to make automotive sheets, and 6061 can also be used to make aluminum sheets. 5xxx series aluminum alloys can also be used in profiles. For example, 5050 aluminum alloy can be used in pipes and profiles.
Different physical properties
The 5xxx series aluminum alloy is characterized by low density, high tensile strength and high elongation; the 6000 series aluminum alloy is characterized by medium strength, good plasticity and excellent corrosion resistance. In particular, it has no tendency to stress corrosion cracking, has excellent weldability, good corrosion resistance and cold workability. It is an alloy with a wide range of applications and broad prospects.
Different processing procedures
The main difference between the treatment processes of 5000 and Series 6000 is the heat treatment. The 5xxx series cannot be heat treated, but the 6xxx series can be heat treated.
5000 series aluminum sheet packaging
Yongsheng aluminum sheet supplier provides you with the most reasonable price, strong and beautiful packaging, fast delivery, guaranteed delivery time, good reputation, and provides you with the best price online 24 hours a day.
5000 series aluminum plate PE film + plastic film + kraft paper packaging
5000 series aluminum plate white paper + plastic film + kraft paper packaging
5000 series aluminum plate anti-collision cotton packaging
5000 series aluminum sheet wooden pallet placement
Yongsheng Aluminum has 25 years of experience in aluminum plate producing and manufacturing. We also manufacture aluminum coils, aluminum foil, aluminum strips, embossed aluminum, aluminum tread plates, aluminum foil lunch boxes, etc. If you want to know more information, please continue to browse our official website or contact us directly!
5000 series aluminum plate for sale
YSA supplies 5xxx series aluminum plates, mainly including 5005, 5052, 5083 and 5754 aluminum plates. Yongsheng Aluminum welcomes you.
YSA provides one-stop customized solutions to global customers, including customized sizes, cutting, surface treatment and deep processing. Accept wholesale, OEM, ODM orders. You can directly send us drawings and samples or tell us your requirements and purposes directly, and we will serve you wholeheartedly! Send us online inquiry or product needs directly, you will get the fastest response!!!