17 Gauge Aluminum Thickness and Weight

Table of Contents

How Thick is 17 Gauge Aluminum

17 gauge aluminum thickness in mm is 1.151 mm.
17-gauge aluminum sheet in inches is 0.0453 inch.

17 Gauge Aluminum Sheet Weight Calculation

Taking the 17 gauge 4’x8′ aluminum sheet as an example, estimate the weight of the 17 gauge aluminum thickness:

Weight = Density x Volume.
Volume = length x width x thickness.

4’x8′ 17 Gauge Aluminum Sheet 

DensityApproximately 0.0975 lbs/cubic inch
Width4 feet/1220 mm/48 inches
Length8 feet/2240 mm/96 inches
Thickness17 ga
1.151 mm
0.0453 inches
Volume208.7424 cubic in
Wight20.352384 lbs

4’x8′ 17 gauge aluminum weight (lbs): 0.636012 lbs/ft2

4×8 17 ga aluminum sheet weight (ounces): 10.176192 oz/ft2

4ft x 8ft 17 gauge aluminum weight (kilogram): 0.28849 kg/ft2

17 Gauge Aluminum Applications

17 gauge aluminum electric fence mesh

17 gauge Aluminum Electric Fence Mesh

17 gauge aluminum sheet for building

17 gauge Aluminum Sheet for Building

How to Cut 17 Gauge Aluminum

To cut 1.51mm aluminum sheet, you can follow these steps:
1. Use a ruler or tape measure to measure and mark the cut line on the aluminum sheet.
2. Prepare cutting tools: You can use various cutting tools depending on the resources available and the accuracy required such as:
– Metal scissors: suitable for thin aluminum sheets. Just place the scissors along the marked line and cut.
-Jig Saw: Attach the metal cutting blade to the jigsaw. Just place the jigsaw blade along the marked line, turn on the jigsaw and cut smoothly along the cutting path.
– Circular Saw: Clamp the aluminum sheet to the workbench or secure it securely to the tabletop. Place the circular saw blade just outside the marked line and slowly cut along the cut line.
3. Safety Precautions: Always wear protective equipment (PPE) such as safety glasses and gloves.

Common Aluminum Sheet Thickness in Gauge

8 gauge aluminum sheet

10 gauge aluminum sheet

11 gauge aluminum sheet

12 gauge aluminum sheet

15 gauge aluminum sheet

16 gauge aluminum sheet

30 gauge aluminum sheet

17 Gauge vs 16 Gauge Aluminum

The thickness of 16 gauge aluminum is thicker than 17 ga aluminum.

Note: When gauge is used for aluminum sheet thickness, the bigger the value, the thinner the thickness.

17 Gauge Aluminum Sheet Metal Near Me

Henan Yongsheng can produce aluminum sheet metal products of various thicknesses such as: 032 aluminum sheet gauge, .040 aluminum sheet gauge, .063 aluminum sheet gauge, 080 aluminum sheet gauge, 090 aluminum sheet gauge, 11 ga aluminum sheet, 24 gauge aluminum sheet, 30ga aluminum sheet, etc.

Leave a Comment

Your email address will not be published. Required fields are marked *

Product-related Information

Boiling Point of Aluminum

Boiling Point of Aluminum The boiling point of aluminum is approximately 2,519°C or 4,566°F. Aluminum has a relatively low boiling point compared to many other …

Read More →
Product-related Information

1060 Aluminum Foil-1060 Alloy

1060 Aluminum Chemical Properties Element Composition (%) Aluminum (Al) ≥ 99.6% Iron (Fe) ≤ 0.35% Silicon (Si) ≤ 0.25% Copper (Cu) ≤ 0.05% Manganese (Mn) …

Read More →

1050 Aluminum

1050 Aluminum 1050 aluminum alloy is one of the most basic and commonly used alloys in aluminum products, whether it is for food packaging, industrial …

Read More →

3004 Aluminum Foil-Aluminum Tempers

3004 aluminum foil belongs to the 3000 series of aluminum alloys, which are known for their excellent corrosion resistance and formability. The 3004 alloy is …

Read More →

Laminating Foil-Three Physical Properties

Laminating foil, it was first proposed as a packaging material for butter at the World Dairy Congress in Berlin in 1937. The results of the …

Read More →

Wide Aluminum Foil

Wide aluminum foil Wide aluminum foil are commonly seen in industries where aluminum foil rolls are wider for specific needs like packaging, insulation, and electronics …

Read More →

Get A Free Quotation

1060, 3003 aluminum coil

Send Inquiry

Reach out to us today and get your quotation in 12 hours