About 13 Gauge Aluminum

Table of Contents

13 Gauge Aluminum Thickness

13 gauge aluminum sheet in mm is 1.829 mm.
13 gauge aluminum in inches is 0.0720 inch.

13 gauge aluminum sheet thickness

13 gauge aluminum sheet

Thickness:(0.0720inch | 1.829mm)

13 Gauge Aluminum Sheet Weight

Taking the 13 gauge 4’x8′ aluminum as an example, estimate the weight of the 13 gauge aluminum thickness:

Weight = Density x Volume.
Volume = length x width x thickness.

13 Gauge Aluminum Sheet 4ft x 8ft

DensityApproximately 0.0975 lbs/cubic inch
Width4 feet/1220 mm/48 inches
Length8 feet/2240 mm/96 inches
Thickness13 ga
0.0720 inches
Volume331.776 cubic in
Wight32.34816 lbs

Unit Conversion

1 lb=16 oz

1 lb=0.45359237 kg



Pounds per square foot (lbs/ft2)


Kilogram per square foot (kg/ft2)


Ounces per square foot (oz/ft2)



  • Roofing and Exterior Sheeting: 13ga aluminum sheets can be used in roofing and exterior siding as cladding on residential and commercial buildings.
  • Billboards and Signs: The flat surface and malleability of aluminum sheets make them useful for indoor and outdoor billboards, street signs, signs, and more.
  • Freezers and Refrigeration Equipment: 1.829mm thick aluminum sheeting can be used to make the inner and outer wall panels of freezers to keep the temperature of refrigeration equipment stable.
  • Vehicle Interior and Exterior Parts: It can be used to make body interior panels, door panels, roof covers and other components.
  • Electronic Product Casing: This aluminum plate can be used to make electronic product casings such as computers, mobile phones, and TVs to provide protection and heat dissipation.

Common Aluminum Sheet Thickness in Gauge

13 Gauge Steel vs Cast Aluminum

steel vs casting aluminum

13 gauge steel is approximately 2.3mm thick. Cast aluminum, on the other hand, is aluminum that is melted and poured into a mold to form a specific shape. Cast aluminum is commonly used in automotive parts, cookware, and decorative applications.
Steel is stronger than aluminum, and cast aluminum is lighter and more malleable than steel. Aluminum has better corrosion resistance than steel, which is more susceptible to rust and corrosion unless coated or treated. Cast aluminum is suitable for applications where weight reduction is important, such as in the automotive and aerospace industries.
Generally speaking, steel is cheaper than aluminum. 13-gauge steel is commonly used in structural applications where strength and stiffness are critical, such as building frames, automotive components and machinery. Cast aluminum is commonly used in automotive parts such as engine components, wheels and trim.

What is Difference Between 13 Gauge and 18 Gauge Aluminum

The larger the gauge value, the smaller the thickness. Therefore, the thickness of 13 gauge aluminum is larger than that of 18ga aluminum sheet.

Where to Buy 13 Gauge Aluminum Sheet Metal

Henan Yongsheng Aluminum Factory

Henan Yongsheng can produce aluminum sheet metal products of various thicknesses such as: 032 aluminum sheet gauge, .040 aluminum sheet gauge, .063 aluminum sheet gauge, 080 aluminum sheet gauge, 090 aluminum sheet gauge, 11 ga aluminum sheet, 13 gauge aluminum sheet, 30ga aluminum sheet, etc.

Leave a Comment

Your email address will not be published. Required fields are marked *

Product-related Information

Boiling Point of Aluminum

Boiling Point of Aluminum The boiling point of aluminum is approximately 2,519°C or 4,566°F. Aluminum has a relatively low boiling point compared to many other …

Read More →
Product-related Information

1060 Aluminum Foil-1060 Alloy

1060 Aluminum Chemical Properties Element Composition (%) Aluminum (Al) ≥ 99.6% Iron (Fe) ≤ 0.35% Silicon (Si) ≤ 0.25% Copper (Cu) ≤ 0.05% Manganese (Mn) …

Read More →

1050 Aluminum

1050 Aluminum 1050 aluminum alloy is one of the most basic and commonly used alloys in aluminum products, whether it is for food packaging, industrial …

Read More →

3004 Aluminum Foil-Aluminum Tempers

3004 aluminum foil belongs to the 3000 series of aluminum alloys, which are known for their excellent corrosion resistance and formability. The 3004 alloy is …

Read More →

Laminating Foil-Three Physical Properties

Laminating foil, it was first proposed as a packaging material for butter at the World Dairy Congress in Berlin in 1937. The results of the …

Read More →

Wide Aluminum Foil

Wide aluminum foil Wide aluminum foil are commonly seen in industries where aluminum foil rolls are wider for specific needs like packaging, insulation, and electronics …

Read More →

Get A Free Quotation

1060, 3003 aluminum coil

Send Inquiry

Reach out to us today and get your quotation in 12 hours